1. Depending where you are in the platform add Measurements can be done either:

1.1 Using the main menu at the top of the page

1.2 Select a sample to be assigned 


1.3 Or After creating your first sample

1.4  Add measurement from the dropdown on the sample menu.

 
2. Upload your measurement and press Assign to Sample. Note you can drag and drop multiple measurements at once.

3.  Select a physical measurement type and the instrument you used, our parser will autodetect your settings, so you don't need to worry about that. Then press Apply.
Note!
By default, you will be able to choose only physical measurements and instrument that were predefined for your lab by your lab master.

4.  Check the parsing status and press Relate to Sample.  

Did this answer your question?